The Set Screw Fittings is abudget friendly option for electrical installations. Compared to some other complex fittings, it is relatively inexpensive. This makes it an ideal choice for large industrial installations, helping to keep overall costs in check without sacrificing quality.
One of its most prominent advantages is the simplicity of installation. Electricians with basic skills can easily install it. There is no need for specialized or expensive tools. Asimple screw driver is usually sufficient to tighten the set screw, making the installation process quick and hassle free.
It provides a secure and reliable connection between electrical conduits or between conduits and other electrical enclosures. The set screw design ensures that the conduit is heldfirmly in place. This reliable connection is crucial for maintaining the integrity of the electrical conduit system, preventing any accidental disconnections that could lead to electrical failures or safety hazards.
Set Screw Fittings are highly versatile. They can be used in a variety of electrical setups, whetherit's a new installation or a retrofit project. They are suitable for different conduits sizes, allowing for flexibility in electrical system design and expansion.
Since they are typically made of conductive metals like steel or aluminum alloy, they ensure excellent electrical conductivity. This enables the seamless flow of electricity throughthe conduit system, which is essential for the proper functioning of electricalcircuits. I
When a conduit is inserted into the Set Screw Fittings, the set screw, which is threaded into the body ofthe fittings, comes into play. As the set screw is tightened, its tip presses against the outer surface of the conduits. This creates a strong frictionalforce that holds the pipe firmly within the fittings. This mechanical fixing not only keeps the conduit in place but also provides the necessary stabilityto the overall electrical system.
The conductive nature of the set screw and the firm connection it creates between conduits ensure electrical continuity. The set screw connection allows for a continuous path forelectrical current to flow through the conduit system. Any interruption in thispath could lead to issues such as power loss or electrical interference, butthe Set Screw effectively prevents such problems.
Checks Before starting theinstallation, it is important to check the Set Screw Fittings for any visibledefects. Ensure that the set screw is in good working condition and can betightened and loosened smoothly. Also, measure and cut the conduits to theappropriate lengths. Make sure the ends of the conduits are clean, smooth, andfree from burrs or deformities.
Gently insert the end of theconduits into the Set Screw Fittings. Insert it until it reaches the properdepth, which is usually indicated by a mark or a lip inside the fittings. Thisensures that the set screw will engage with the pipe at the correct locationfor a secure connection.
Using a suitablescrewdriver, start tightening the set screw. Begin with gentle turns until thescrew makes contact with the conduits. Then, continue tightening it graduallyuntil the conduits is held firmly. Be cautious not to over tighten, as this maydamage the conduits or the set screw. A snug fit is all that is required toensure a reliable connection.
After tightening the setscrew, visually inspect the connection. Check if the conduit is properly seatedin the fittings and if there are any signs of misalignment. Give the conduit agentle tug to test the connection's strength. If any looseness is detected, retighten the set screw until the connection is secure.
